Technical Specifications - HP ProLiant XL730f Gen9 Server Quickspecs

QuickSpecs

Technical Specifications

Server Tray Tray Dimensions (H x W x D)
Weight
(approximate)
Input Requirements
(per power supply)
Power Supply Output
(per power supply)
System Inlet Temperature
Altitude
Emissions Classification
(EMC)
HP Inifiniband
FDR/Ethernet 10Gb/40Gb
2 port 544 AL Adapter
Environment-friendly End-of-life Management
Products and Approach and Recycling
Network Interface
Compatibility
Data Transfer Method
Controller
c04293382 — DA —15204 Worldwide—Version 2—November 1, 2014
1.75 x 7.9 x 38.27 in (4.45 x 20.07 x 98.98cm)
Maximum
Power input provided by
HP Apollo f8000 Rack
Rated Steady-State Power 600W per server
Operating
Non-operating
Operating
Non-operating
FCC Rating
Normative Standards
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
statements.
InfiniBand QDR, FDR10, and FDR; Ethernet 10 or 40 Gb/sec
IEEE 802.1AS
IEEE1588
IEEE 802.3az
PCI Express v 3 x8 adapter
Mellanox Connect X-3 Pro
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
HP ProLiant XL730f Gen9 Server
30 lb (13.6 kg)
50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft
(1.0°C per every 304.8 m) above sea level to a
maximum of 10,000 ft (3048 m), no direct
sustained sunlight. Maximum rate of change is
18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 86°F (30°C).
-22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
10,000 ft (3048 m). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
1500 ft/min (457 m/min).
30,000 ft (9144 m). Maximum allowable
altitude change rate is 1500 ft/min (457
m/min).
Class A
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt
15; ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
or contact your nearest HP
Page 18