HP ProLiant XL730f Gen9 Server Quickspecs page 10

QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: The HP Apollo 8000 System ships as a Configured-To-Order (CTO) product only.
The Apollo 8000 System consists of up to seventy-two (72) HP ProLiant XL730f Gen9 Server Trays in a single HP Apollo f8000
Rack, cooled by a single HP Apollo 8000 iCDU Rack. The Apollo 8000 System is only sold as a Factory Integrated Model. To ensure
only valid configurations are ordered, the sales system acts as a configurator. Contact your local sales representative for
information on configurable product offerings and requirements. This section lists some of the steps required to configure a
Factory Integrated Model of the Apollo 8000 System.
NOTE: The Configure-To-Order Apollo 8000 System must include an Apollo f8000 Rack, an Apollo 8000 iCDU Rack, at least
seventy-two (72) ProLiant XL730f Gen9 Server Trays and eight (8) HP InfiniBand Switches for Apollo 8000.
NOTE: Configure-To-Order Apollo 8000 Systems start with the 144 ProLiant Servers part of 72 HP ProLiant XL730f Gen9 Server
Trays.
NOTE: FIO indicates that this option is only available as a factory installable option.
HP ProLiant XL730f Gen9 Server
Step 1. Choose at least seventy-two (72) ProLiant XL730f Gen9 Server Trays for 144 servers
total.
For each ProLiant XL730f Gen9 Server choose the processor type. Four processors (two 2P servers) ship standard with each
ProLiant XL730f Gen9 Server Tray.
NOTE: Processor mixing of different frequencies and Wattage is not supported in any single tray.
Step 2. Choose one of the following kits for the Intel E5 2600v3 Xeon processor for each
server tray.
Intel Xeon E5-2670 v3
HP XL7x0f Intel® Xeon® E5-2670 v3 FIO Processor Kit
Intel Xeon E5-2680 v3
HP XL7x0f Intel® Xeon® E5-2680 v3 FIO Processor Kit
Intel Xeon E5-2690 v3
HP XL7x0f Intel® Xeon® E5-2690 FIO v3 Processor Kit
Intel Xeon E5-2695 v3
HP XL7x0f Intel® Xeon® E5-2697 FIO v3 Processor Kit
Step 3. Choose memory for each ProLiant XL730f Gen9 Server Tray.
NOTE: Choose a minimum of 4 kits per server tray or a maximum of 32 kits per server tray. Choose in multiples of 4.
HP 8GB (1x8GB) Single Rank x4 Registered Heat Spreader Memory Kit
HP 16GB (1x16GB) Dual Rank x4 Registered Heat Spreader Memory Kit
Step 4. Choose the SFF SSD for the server tray.
NOTE: Choose a minimum of 0 kits or a maximum of 2 kits per server tray, must be ordered in pairs.
NOTE: If you choose to have SSDs in the server tray, both SSDs must be the same size.
HP 120GB 6G SATA 2.5in VE NHP SSD
c04293382 — DA —15204 Worldwide—Version 2—November 1, 2014
HP ProLiant XL730f Gen9 Server
775159-L21
775160-L21
775161-L21
775162-L21
778267-B21
778268-B21
745794-B21
Page 1
0