Ddr Module Installation - VIA Technologies P4MA PRO User Manual

Chapter 2

DDR Module Installation

You can install either single sided or double sided 184-pin DDR DIMM mod-
ules into the DDR DIMM slot, depending on your requirements. Differing from
SDR DIMM, DDR DIMM modules have only one notch on the center of the
module. The number of pins on either side of the breaks are also different. The
memory modules will only fit if placed in the correct orientation.
You can install DDR SDRAM modules in any of the following combinations:
Slot
Slot 1
(Bank 0 & Bank 1)
Slot 2
(Bank 2 & Bank 3)
M aximum System M emory Supported
1. The DDR DIMM module has only one notch on the center.
2. Insert the DDR module vertically into the DDR DIMM slot. Make sure the
notch is correctly aligned.
3. The plastic clips at sides of the DIMM slot will automatically close shut.
M emory M odule
64MB, 128MB,
256M B, 512MB, 1GB
64MB, 128MB,
256M B, 512MB, 1GB
Notch
2-6
Total M emory
64MB~1GB
64MB~1GB
64MB~2GB