CipherLab 1660 User Manual page 156

1660 Barcode Scanner
ENTERING PIN CODE FOR BLUETOOTH CONNECTION
By default, the Bluetooth PIN code is set to "0000". Maximum 16 characters are allowed.
Note: When using Bluetooth HID, some driver of Bluetooth dongle may not support
pre-defined PIN code for authentication. In this case, make sure you disable
authentication before pairing. The host PIN code will be displayed on the computer
screen. Have the scanner read the setup barcode "Enter PIN Code in Decimal" to
input the matching PIN code quickly.
Enter PIN Code in Hexadecimal ...
1) Read one of the labels above to specify the PIN code, in decimal or hexadecimal.
2) Read the "Decimal
142 for the desired digits or character string.
3) Read the "Validate" label to complete this setting.
144
User Guide
Enter PIN Code in Decimal ...
Value" label on page 141 or the "Hexadecimal Value" label on page
Enter Setup