Advertisement
2.2
Front panel assembly
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and front panel
assembly.
2.2.1 Removing the cassette mechanism assembly
(See Fig.30)
(1) Disconnect the card wire from connector CN33 on the head
amplifier & mechanism control board.
(2) Remove the two screws Q, and the two screws R attaching
the cassette mechanism assembly.
2.2.2 Removing the headphone board
(See Fig.30)
(1) Remove the screw S and pull out the headphone board
backward.
(2) Cut off the band.
2.2.3 Removing the mic volume board
(See Fig.31, 32)
(1) Pull the mic volume knob toward the front.
(2) Remove the three screws T attaching the holding board.
(3) Remove the holding board from mic volume board.
1-14 (No.22041)
Head amplifier & mechanism control board
Q
Cassette mechanism assembly
Fig.30
Fig.31
Mic volume board
T
T
Holding board
Fig.32
CN33
R
Headphone board
R
S
Front panel assembly
Mic volume knob
Advertisement
