JVC HX-Z9V Service Manual page 10

2.1.6 Removing the T.flux board
(See Fig.17, 18)
• Prior to performing the following procedure, remove the metal
cover and the CD changer mechanism assembly .
(1) Disconnect the card wire from connector CN102 on the
T.flux board.
(2) Remove the two plastic rivets attaching the T.flux board.
(3) Remove the T.flux board from the bracket which is located
on the inner bar. (two joints d)
1-10 (No.22041)
Front panel assembly
T.flux board
Fig.17
T.flux board
CN102
Plastic rivet
d
Plastic rivet
Fig.18
Inner bar