D-Link DCS-5300 User Manual page 60

Next, click the Applications button under the Tools tab to set the application settings for the DCS-5300.
In this window, follow the steps below to set the application settings for
snapshots to be recorded to an FTP site:
• Select the weekdays you would like to record and enter the "Snapshots
begin" time and "Snapshots end" time for the weekly schedule, or select
"All the time except for the above schedule" if you want to enable full
time snapshot recording.
• Check Event operation
• Set the delay "before detecting next event" to avoid continuous false
alarms following the original event.
• Set the delay to "take snapshots after event" to capture the direction
of the moving object.
• Check the window name (in this case Living room).
• Check "Upload snapshots while motion detected."
• Click "Send snapshots by FTP" and check "FTP put snapshots with
date and time suffix"
• Click the Apply button to save the settings.
Click the Apply button when finished. You are now able to record snapshots to your FTP server when motion detection
is triggered.
D-Link DCS-5300 User Manual
X X X
Living room
X
X
59