D-Link DCS-5300 User Manual page 67

The above diagram shows a typical wiring configuration for a normally closed PIR motion sensor. Please refer to your
specific motion sensor for the power supply connection to the device since this will be critical to the success of your
installation. Note that the positive from the PIR is connected to the D+ of the I/O port of the camera and the negative
from the PIR is connected to the D- of the camera I/O port.
Configuring Your Camera for External Trigger Based Recording
To configure your camera to record when triggered by an external device, you must first set your SMTP or FTP set-
tings in order to send snapshots to your email account or FTP server.
D-Link DCS-5300 User Manual 66