Leds; Selecting Computers Using On-Screen Display (Osd) - Black Box KV9204A User Manual

SERVSWITCH EC SERIES PS/2 AND USB (USER/CPU) KVM SWITCH
4.2.4 LED
S
The ServSwitch has LEDs next to the front-panel buttons. The LEDs light red when
the corresponding port is selected. The LED flashes red when the port is running
in either AutoScan or manual scan mode. The LEDs light green when the port
connects to a computer that's powered on.

4.3 Selecting Computers Using On-Screen Display (OSD)

The ServSwitch can operate via an on-screen display (OSD). To use this option,
press the Ctrl key twice within two seconds to see the hotkey menu (an OSD
option) if it is enabled. Press the Left-Ctrl key three times within two seconds, and
a ServSwitch menu screen appears showing a list of the computers with
corresponding port numbers, names, and statuses. See Figure 4-1.
Port channel
address
Highlighted by
arrow keys
Security
enabled port
Note also that the short form Hotkey menu can be turned on as an OSD function.
Just press the F4 key, then select More, then Hotkey menu. See Table 4-1 for
Hotkey commands.
18
Figure 4-1. OSD screen.
Currently selected
channel address
To a 16-port slave
To an 8-port slave
Eye mark enabled
Press Enter to go to
the slave screen
FINANCIAL-1F (the
highlighted
information) shown in
Figure 4-2.