Power Supply - Vision Fitness SIMPLE Owner's Manual

PLACEMENT IN YOUR HOME
Please follow the safety instructions to place the Elliptical Trainer in the
location where it will best be used. It is important that you place your
Elliptical Trainer in a comfortable and inviting room. Avoid putting your
Elliptical Trainer in an unfinished basement or undesirable setting. Exercise
adherence will be achieved only if you exercise in an attractive setting.
STABILIZING THE ELLIPTICAL TRAINER
After positioning the Elliptical Trainer
in its intended location, check its
stability by attempting to rock it side to
side. Excessive rocking or wobbling
indicates that your Elliptical Trainer
needs to be leveled. Your Elliptical
Trainer has levelers located under
the guide rails and under the side
stabilizers. Determine which leveler
is not resting completely on the floor.
Loosen the wing nut to the base of
the leveler to allow the leveler to
rotate. Now rotate the leveler to the
left or right until the Elliptical Trainer
is stable. Lock the adjustment by
tightening the wing nut against the
stabilizer or guide rail.

POWER SUPPLY

Your Elliptical Trainer uses a wall mount external power supply. Use only
the power supply provided with your Elliptical Trainer. If you misplace this
power supply, please contact your authorized VISION FITNESS retailer
16
for an original replacement. Use of the wrong power supply may cause
damage to your Elliptical Trainer.