Auto Power Off Setting - Canon imageFORMULA DR-F120 User Manual

Auto Power Off Setting

The scanner automatically turns off if 4 hours elapse without scan-
ning or another operation being performed.
To disable this setting, follow the procedure below.
Log on to Windows as an Administrator.
1
Click the Start button, and then click [All Programs], [Canon DR-
F120], and [Canon imageFORMULA Utility].
imageFORMULA Utility starts.
In Windows 8.1/8, it is registered at the following location.
2
Click [CANON DR-F120 USB] and click [Properties].
Scanner properties are displayed.
3
Clear the [Turn off automatically after 4 hours] check box.
4
Click [OK] to close the scanner properties.
67