Table of Contents
Advertisement
Note:
·
Connect 1N4004 as close as possible to the lock parallel with the lock power terminals
to absorb the back EMF and prevent keypad damage. The 1N4004 is not required for
AC power.
·
To avoid electrostatic discharge from interfering with the keypad, always ground the
terminal.
Quick Programming Guide (Simple) - Single code access
1. Enter: Master Code * (Default [Master Code]: 0000)
2. Enter: 0 Master Code (4 digits) #
3. Enter: 8900 #
4. Enter: 1 Access Code (4 digits) #
5. Enter: *
6. To gain access: Enter the 4-digit Access Code
Quick Programming Guide (Advanced) – Multi-code access
1. Enter: Master Code * (Default Master Code: 0000)
2. Enter: 0 Master Code (4 digits) #
3. Enter: 8901 #
4. Enter: 1 User Number: 00-99 Access Code (4-8 digits) #
5. Enter: *
6. To gain access: Enter the 4-8 digit Access Code followed by the # key.
Refer to the DOLKSS1KB manual for additional programming options.
TRANSMITTER SOLUTIONS WARRANTY
The warranty period of this product is 12 months from the purchasing date. During this period,
if the product does not operate correctly due to a defective component, the product will be
repaired or replaced at the sole discretion of Transmitter Solutions. This warranty does not
extend to the product's casing, which can be damaged by conditions outside of the control of
Transmitter Solutions.
Advertisement
Table of Contents
