Table of Contents
Advertisement
IMPORTANT NOTES FOR SWITCHING BETWEEN SINGLE USER MODE AND MULTI-
USER MODE:
·
Switching between Single User mode and Multi-User Mode will reset all data for the
DOLKSS1KB except the master code.
·
Be sure the User Code, Authorization Code, and Master Code are 4-digits for Single
User Mode. Code entry will not be accepted otherwise.
·
It is necessary to change the Master Code to 4-digits before switching from Multi-User
Mode to Single User Mode.
·
The system takes 2 to 3 seconds to switch between modes. During its switch, do not
press any buttons until the 2 confirmation beeps are heard.
ACCESS LOCK
Access Lock is an optional feature of the DOLKSS1KB. An authorization code can be set-up to
control access. The authorization code will lock all access to all users until unlocked. When
Access Lock is activated, the red LED will remain on.
PROGRAMMING CHART
DOLKSS1KB
Keypad Feature
Begin Programming
Mode (Solid Yellow)
End Programming Mode
Single User Mode
Single User Mode
Set Master Code
Add User Code for
general access
Set optional Authorization
Code for Access Lock
Multi-User Mode
Multi-User Mode
Set Personal Master Code
Add Access Code for up
to 100 different users.
Delete User
Set optional Authorization
Code for Access Lock
Code Entry
Master Code *
*
8900 #
0 4-digit code #
1 4-digit code #
2 4-digit code #
8901 #
0 4-8 digit code #
1 User number: 00 to 99
4-8 digit code #
1 User number: 00 to 99 #
2 User number: 0 to 9
4-8 digit code #
Comments
Set System into Programming Mode. The
default Master Code is 0000.
Note: All of the following commands must
be keyed while in Programming Mode.
Return to normal operation.
Set to Single User Mode and clear all data
Set your new Master Code.
Set 4-digit code for general access.
Set 4-digit code for Access Lock activation.
Set to Multi User Mode and clear all data
Set your new Master Code.
Important Note: It is necessary to change
the Master Code to 4-digits before
switching from Multi-User Mode to Single
User Mode.
Set 4-8 digit code for general access. Each
unique 4-8 digit code will require a new
user number.
Important Note: It is important to
document your user numbers because
users can be deleted and reassigned new
codes for access.
Deletes the user and removes their Access
Code
Set 4-8 digit code for Access Lock
activation.
Advertisement
Table of Contents
