Mixing Input Signals To Mono - Zoom H5 Operation Manual

Mixing input signals to mono

The signals input through Inputs 1/2 can be mixed to a single signal that is sent to both channels.
1.
Press .
2.
Use to select
"IN/OUT", and
press .
3.
Use to select
"In1/2 MONO MIX", and
press .
88
STEREO FILE mode only
4.
Use
and press
NOTE
• When MONO MIX is ON, the names of recording files
will have "_MN" added to the end of the file name, like
"ZOOM0001_MN.WAV".
• This function cannot be used at the same time as the MS
STEREO MATRIX function. When MONO MIX is turned
ON, MS STEREO MATRIX will be disabled.
Input 1/2 only
to select "ON",
.