Zoom H5 Operation Manual page 34

Overdubbing
6.
Press the track button for the track you want to
overdub. Its indicator will light red.
You will now be able to monitor the input signal for the
track to be overdubbed.
HINT
You can also change the Input 1/2 stereo link setting.
(→ P . 22)
7.
Turn to adjust the input level.
34
MULTI FILE mode only
(continued)
8.
To play back an already recorded track while over-
dubbing, press that track's button to light the indi-
cator green.
HINT
• The indicators change in order: red → green → unlit.
• In this state, if you press
of the selected tracks being played back along with the
input signal of the track selected in step 6. This is useful
for rehearsing and checking the input level.
• You can also adjust the volume and panning of the
tracks that are playing back.
9.
Press .
Overdubbing of the track selected in step 6 starts.
NOTE
• The AUTO REC and PRE REC functions cannot be used
with overdubbing.
• When using the MIXER/OVERDUB screen, the PLAY-
BACK SPEED and KEY CONTROL settings for the project
are disabled.
, you can monitor the sound