Adjusting The Input Level (Compressor/Limiter) - Zoom H5 Operation Manual

Adjusting the input level (compressor/limiter)

The unit can automatically raise low-level input signals and lower high-level input signals.
1.
Press .
2.
Use to select "IN/OUT", and press
MULTI FILE mode
3.
Use to select
"COMP/LIMITER", and
press .
94
.
STEREO FILE mode
4.
Use to select the Input to adjust,
and press .
MULTI FILE mode
HINT
Select ALL to use this on all the inputs at once.
5.
Use to select the
COMP/LIMITER type, and
press .
NOTE
The COMP/LIMITER is not used on backup recordings.
STEREO FILE mode