Zoom H5 Operation Manual page 36

Overdubbing
13.
Use to select FILE,
and press .
14.
Use to select the
file, and press
From the same project folder, select the WAV file that you
want to assign to the track.
Press to cancel file assignment.
36
MULTI FILE mode only
(continued)
Track name Name of
assigned file
.
NOTE
• If the selected track is stereo, you can only assign a
stereo file to it. If it is mono, you can only assign a
mono file.
• Files recorded in MS RAW mode cannot be assigned to
tracks 1/2.
HINT
• By selecting "NONE", you can also remove an assigned
file from a track.
• By selecting and playing back a mixed down file while
overdubbing new tracks, you can layer recordings
repeatedly. (→ P . 54)
15.
To end overdubbing, press
After adding a recording, the audio files assigned to the
tracks will be used when playing back and editing the
project.
.