QMS 1660E Getting Started page 61

6 To start the CrownNet Manager for OS/2 automatically each
time the print server is turned on, add the following
commands, in this order, at the end of the STARTUP.CMD file
(but before any @EXIT command):
set crownman=c:\crown
start c:\crown\crownman.exe -m
» Note: The -m option minimizes the CrownNet Manager window to
an icon after the program opens.
7 To start the CrownNet Manager now, open an OS/2 window
and type the following commands:
set crownman=c:\crown↵
start c:\crown\crownman.exe↵
The CrownNet Manager window appears.
8 To install specific ports, choose Install from the CrownNet
Manager window.
9 In the Installation of CrownNet Ports dialog box, select the
appropriate printer port(s) and choose Install.
The selected ports are displayed in the CrownNet Manager
window.
» Note: Port names are either the default or those chosen in the
next section, "Configuring the Interface."
Workstation
Use this procedure to install the CrownAdmin software on the work-
station. CrownAdmin lets you use Remote Console; it is not neces-
sary for printing via OS/2.
1 With the workstation running, insert the disk containing the
CrownAdmin software for DOS or Windows in the disk drive.
2 Open a session under OS/2:
n
OS/2 version 1. x —Open a DOS Window session.
n
OS/2 version 2. x —Open a WIN-OS/2 session.
Connecting to an Ethernet Network
Installing the
Software
4-7