The Functions Of The Control Panel - Daewoo DWD-M10E6 Instruction Manual

THE FUNCTIONS OF THE CONTROL PANEL

Program selector
For switching the washing machine on and off
and for selecting the program.
Can be rotated in both direction.
Even if the program selector rotates while the
program is running, the program is not changed
(except for off ) .
(All program is electronically controlled by PCB)
Spin selector
You can select the spin programs (Spin
1000rpm and Spin 500rpm) by turning the
Program selector.
500rpm of spin velocity is selected
automatically with WOOL / Hand Wash
program in order to protect damage on laundry.
1000rpm of spin velocity is selected
automatically with COTTON / SYNTHETIC /
Quick/30° / Intensive / Sportswear / AUTO 40°
programs.
*Warning
If value of unbalance is extremely high, spin
speed can't reached that r.p.m of selected by
spin selector.
Note
There are two types of control panels (A or B) for each region, so please check the type fits for
the function.
By turning right the Program Selector, the program is selected in order of
COTTON 40° COTTON 40° ECO
SYNTHETIC WOOL/Hand Wash
Rinse Spin 500rpm
COTTON 60°
Quick/30°
Spin 1000rpm Drain
8
Indicator light
The respective indicator lights up, when the
required program segment runs or 'Time
delay' is selected.
Time delay
To pre-engage time for washing.
As the button is pressed, the delayed time is
repeated as following;
2hours 3hours 4hours
46hours 47hours
Start/Hold button
For starting the washing cycle.
(program must have been selected)
Button for options
(in addition to the program if required)
Rinse + Extra rinse cycle.
Rinse Hold No final spin cycle.
• Combination of additional option is possible.
• The indicator lamp of the buttons lights up if
options are active.
• Switch off option : Press button again.
COTTON 60°/Pre
Intensive Sportswear
OFF COTTON 40° COTTON 40° ECO
• • •
max 48hours
COTTON 95°
AUTO 40°
•••