Garbled Terminal Display - HP 5920 Switch Series Installation Manual

If the configuration terminal displays nothing when the switch is powered on, verify the following items:
The power supply is supplying power to the switch.
•
• The console cable is correctly connected.
The console cable has no problem and the terminal settings are correct.
•

Garbled terminal display

If terminal display is garbled, verify that the following settings are configured for the terminal, for
example, HyperTerminal:
Baud rate—9,600
•
Data bits—8
•
• Parity—none
Stop bits—1
•
Flow control—none
•
• Emulation—VT100
35