Installing The Switch; Installing The Switch In A 19-Inch Rack; Installation Prerequisites - HP 5920 Switch Series Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow

Installing the switch in a 19-inch rack

Installation prerequisites

The rack depth for the HP 5920AF-24XG, 5920AF-24XG TAA, 5900AF-48XGT-4QSFP+,
5900AF-48XGT-4QSFP+ TAA, 5900CP-48XG-4QSFP+, 5900CP-48XG-4QSFP+8Gb FC B-F, and
5900AF-48XG-4QSFP+ must be 1000 mm (39.37 in).
The distance from the front to the rear posts of the rack must meet the requirements described in
You must use both the mounting bracket and the rack mounting rail kit to rack-mount the switch.
5
Table 4.