Set Param; Get Param - Toshiba B-EP Series Operation Manual

(4) [Get Param]

You can use this button to retrieve the current parameters from the printer and displays them on the screen.
Retrieval processing is performed whether setup groups are checked.
(5) Menu
You can use useful functions.
(6) [Exit]
This button is used to exit the "B-EP Setting Tool" while discarding the current settings.
All setup items are defaulted when the "B-EP Setting Tool" is started next time.
(7) Setup Confirmation
You can confirm settings by retrieving parameters.
Another way to confirm the settings is to enter SYSTEM mode, select [<1>DIAGNOSTIC] - [MAINTENANCE
CONT] and press the [POWER] key. The self-test results are printed. You can confirm the settings from
the printed results.

Set Param

Parameters set for items in checked groups on all tabs are updated in the printer.
Setting of items in checked groups is enabled.
During updating, the progress screen is displayed.
You can stop updating by clicking [Cancel].
When the confirmation message is displayed, click [OK] or [Cancel].
When updating is successfully completed, the progress screen disappears and the main screen is displayed
again.
When updating fails, an error message is displayed.
Data already processed before updating is canceled or fails are updated in the printer.
Get Param
Current parameters for all setup items on all tabs are retrieved from the printer.
However, part of parameters cannot be retrieved such as Bluetooth bonding information and supplicant file
information.
During retrieval, the progress screen is displayed.
You can stop retrieval by clicking [Cancel].
When the confirmation message is displayed, click [OK] or [Cancel].
When the retrieval is successfully completed, the progress screen disappears and the main screen is displayed
again. Retrieved set values are displayed.
When the retrieval fails, an error message is displayed.
When no parameters are retrieved, the main screen remains unchanged.
9