Maximum/Minimum Recording - Elcometer 148 Operating Instructions Manual

R

6 MAXIMUM/MINIMUM RECORDING

1. To register the maximum and minimum reading over a series of tests, press and hold-down the Hold/
Max-Min button until the display shows MAX and MIN blinking.
2. In this mode, proceed to make a series a tests.
3. To display the highest and lowest reading for the series of tests, press the Hold/Max-Min button once,
the highest reading will appear with the Max icon momentarily followed by the lowest reading with the
Min icon, following which the unit resumes measurement.
4. To stop or make a new recording, press and hold-down the Hold/Max-Min button until the MAX and
MIN annunicator disappear. Repeat step 1 to begin new recording.
5. Auto shut-off is disabled when recording is activated.
8