Table of Contents
Advertisement
12.2 Alarm Mode
Your gauge includes an Alarm Mode. You set the limits, and if a measurement falls outside of these
limits your gauge will signal an alarm (a red light on the front panel of the instrument and/or an
audible beep).
This feature may be used for a variety of applications to verify the material is within the manufacturer
specifications.
There are two limit values, ALARM LO LIMIT and ALARM HI LIMIT. You can choose to activate
both or just one of these values depending on your requirements.
To enable/disable Alarm Mode:
1. Press
, scroll to the UTIL menu and then highlight the ALARM STATUS function.
2. Use the
and
3. Press
to return to the measurement screen, ready to begin taking readings.
To set the Alarm limits:
1. Press
, scroll to the UTIL menu and then highlight the ALARM LO LIMIT or ALARM HI
LIMIT function.
2. Use the
and
proceed to step 7.
3. Alternatively, press
4. Use the
and
5. Use the
and
6. Repeat steps 4 and 5 until the value is correct.
7. Press
to set the alarm value and return to the menu screen, or
8. Press
to return to the measurement screen.
13 MEASUREMENT - RECORDING YOUR READINGS
Your gauge is equipped with a data logger - an essential feature for improving the efficiency of
product inspection. With a data file open, all your readings values are saved into the file, therefore
eliminating the need to manually record measurements during the inspection process. Once all the
measurements have been taken, the gauge can then be connected to a computer or serial printer
to save and print the results of the inspection.
19
arrows to toggle the ALARM STATUS on/off/audible.
arrows to scroll the value. When the correct value is being displayed,
to display the Digits Edit Box.
arrows to scroll the highlighted value.
arrows to scroll the digit locations.
to cancel.
Advertisement
Table of Contents
