Set The Remote Access Code; Remote Answering System Operation - VTech Cordless Telephone User Manual

Hide thumbs Also See for Cordless Telephone:

Table of Contents

Answering system operation

Set the remote access code

. Press SETUP twice and you will hear "Remote access code. To change

the setting, press change."

2 . Because the remote access code was set to 19 at the factory, press

CHANGE and you will hear the default code "19".

3 . Press and release CHANGE to advance the remote access code

number by one . Press and hold CHANGE to advance the remote

access code by 0 .

4 . When the desired number is heard . Press SETUP to save and advance

to the next menu option or press PLAY/STOP

. From any touch tone telephone, dial your telephone number .

2 . While the outgoing announcement is playing, enter your two-digit

remote access code .

3 . Hang up to end the call and save all undeleted messages .

If you pause for more than 0 seconds during remote access, you will hear

a help menu listing all features and commands . If no command is entered

for the following 20 seconds, the call will end automatically .

to save and exit .

www.vtechphones.com

Table of Contents