Directory
Review and dial entries
• Press MENU, with DIRECTORY highlighted, press SEL . With
REVIEW in the first line, press SEL .
- OR -
With the handset in idle, press
directory entry will be displayed .
• Scroll through the directory entries using
first character of the name to be searched (using the digit keys) .
Continue pressing the
entry to be dialed .
or SPEAKER to dial the number .
• Press
Edit a directory entry
• Follow the steps in Review and dial entries (above) to reach the
entry you wish to edit .
• Press SEL to enter number edit mode .
• Press and release MUTE/REMOVE to backspace, then press the
digit keys to correct the number . Press and hold REDIAL/PAUSE
to add pauses if necessary .
• Press SEL .
• Press MUTE/REMOVE to backspace and use the digit keys to
enter the correct name .
• Press SEL . A confirmation tone will sound .
to enter the directory . The first
and
or enter the
or
scroll keys, until you reach the
www.vtechphones.com
> DIRECTORY
CALL LOG
EDIT NUMBER
800-595-9511_
EDIT NAME
VTech Com_
• When reviewing
the directory, the
second line of
the display will
show the phone
number, up to
6 digits . For
numbers longer
than 6 digits,
only the first 3
digits will be
*
shown . Press
or # to scroll the
phone number
to see the
additional digits .
• If there are no
entries in the
directory, when
it is accessed,
DIRECTORY
EMPTY will
display .
2