Troubleshooting - VTech Cordless Telephone User Manual

Troubleshooting

If you have difficulty operating your phone, the suggestions below should solve the problem . If you still have difficulty after
trying these suggestions, call VTech Communications at -800-595-95 . In Canada, call VTech Telecommunications
Canada Ltd . at -800-267-7377 .
Problem Suggestion
My phone doesn't • Make sure the power cord is plugged in .
work at all .
• Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall
• Disconnect the AC adaptor for a few minutes, and then reconnect it .
• Charge the battery in the handset for 6 hours . For optimum daily performance, return the
• Reset the base . Unplug the unit's electrical power . Wait for 5 seconds then plug it back in .
• You may need to purchase a new battery, please refer to the battery sections in this user's
I cannot get a dial • Try all the suggestions above .
tone .
• Move the handset closer to the base . You might have moved out of range .
• Your line cord might be malfunctioning . Try installing a new line cord .
• If the previous suggestions don't work, disconnect the base unit from the telephone jack and
jack .
handset to its base when not in use .
Allow up to one minute for the handset and base to reset .
manual .
connect a different phone . If there is no dial tone on that phone either, the problem is in your
wiring or local service . Contact your local telephone company .
www.vtechphones.com
43