Konica Minolta bizhub PRO 920 Network Scanner Operations page 120

Using the Network Scanner Features
5
Configure the necessary items.
– For more information on the
configurations on the Scanner
Setting Basic screen, refer to
"About the Scanner Setting Ba-
sic Screen" on Page 8-3.
6
Set an original and press the [Start] button.
The original is scanned, and the scanned data are sent to an specified
destination.
7
To continue transmission, go back
to the step 5 and repeat the proce-
dure.
To stop scanning, press [Address].
– Then, the Select Destination/
Storage Locations screen re-
turns.
– When a lot of original is scanned, [Job Reserve] is indicated on the
screen during the scanning process.
– You can press [Job Reserve] and set the next job. Immediately
upon completion of the previous job, you can set the original and
press the [Start] button.
bizhub PRO 920 Scanner
7
7-21