Konica Minolta bizhub PRO 920 Network Scanner Operations page 113

7
10
To continue transmission, go back
to the step 8 and repeat the proce-
dure.
To stop scanning, press [Address].
– Then, the Select Destination/
Storage Locations screen re-
turns.
– When a lot of original is scanned, [Job Reserve] is indicated on the
screen during the scanning process.
– You can press [Job Reserve] and set the next job. Immediately
upon completion of the previous job, you can set the original and
press the [Start] button.
When an FTP server is Input Manually
1
Follow the Step 1 to 5 of "When an FTP server is Already Registered"
on Page 7-12.
2
Press the [Address Input] key.
– If you select a destination from
the registry, refer to "When an
FTP server is Already Regis-
tered" on Page 7-12.
The Address Input screen appears.
3
Press the [Host Address] key to in-
put a Host Address.
– Pressing the [Host Address] key
displays the character input
screen.
– For more information on how to
input characters, refer to "How to Input Characters" on Page 3-7.
4
Press the [File Path] key to input a
File Path.
– Pressing the [File Path] key dis-
plays the character input
screen.
– For more information on how to
input characters, refer to "How to Input Characters" on Page 3-7.
7-14
Using the Network Scanner Features
bizhub PRO 920 Scanner