Currie tech IZIP VIA URBANO Assembly Manual page 6

Pedals
L
Tighten pedals
Currie Technologies
Technical and Customer Service
12.
Find the pedals in your parts box. Grease the threads
into the crank arms using a 15mm open-end wrench
opposite thread directions and must go on a specific side of the bicycle. The pedal meant
for the drive-side (the side of the bicycle with the chain and gears) has a standard thread,
which is tightened clockwise. The non-drive-side pedal has a reverse, non-standard
thread. It must be turned counter-clockwise to be screwed in. The pedals are marked 'R'
and 'L' for "Right" and "Left."
13.
Turn the bike right-side-up
14.
Adjust your front and rear brakes.
factory; refer to your owner's manual for detailed instructions on brake adjustment or
consult a professional bike mechanic if you are not comfortable making these adjustments
yourself. Do not attempt to ride your bicycle without properly adjusting the brakes!
15.
Adjust your shifter and derailleur
Riding your bicycle without properly adjusting the drivetrain can cause irreparable
damage! Consult a professional bike mechanic if you are not comfortable making these
adjustments yourself
1-800-377-4532
and
. Note that the pedals have
, using the kickstand to keep it upright.
Your brakes may not be fully adjusted from the
, referring to the owner's manual for full instructions.
thread them securely