Front Wheel - Currie tech IZIP VIA URBANO Assembly Manual

H
G
I
Quick-release skewer
Springs
Tension adjusting nut
J
Dropout protector
(remove)
Brake
caliper
8.
9.
10.
11.

Front Wheel

Remove the black plastic dropout protector from the fork (Photo
H). Remove the two black plastic caps from the front wheel's hub.
Find the quick-release skewer
Refer to diagram J for assistance with this step:
Remove the tension adjusting nut and one spring from the quick-
release skewer
, taking care not to lose either of the small springs.
the skewer through the front hub,
Replace the spring and nut
with the brake rotor.
for now, about two turns in.
Drop the front wheel into the fork
Close the wheel's quick-release
slot in the brake caliper.
the skewer's end nut to adjust preload as necessary to make the wheel
secure. Refer to the appendix to this guide discussing wheel quick
releases for more information on the use and adjustment of quick-release
levers. It is vital to your safety that you understand and properly
secure this lever!
Currie Technologies
Technical and Customer Service
in your parts box (Photo I).
Push
starting from the side of the wheel
. Leave the nut loose
, guiding the brake rotor into the
, tightening
1-800-377-4532