How To Remove Calibration Weight Unit - KERN EW Service Manual

5.7 How To Remove Calibration Weight Unit

5.7.1 EG 220-620
1. Remove the CN3 connector. (Removing AJDP P.C.B. in advance makes it easy to
do it.)
2. Remove (cut) the cord band.
3. Unscrew at two points.
5.7.2 EG 2200-4200
Remove SW cord assy from AJDP circuit board
(1)
Remove the weight holder
(2)
- 39 - EW_EW-C_EG_N-SH-e-0722