How To Install Ajdp Circuit Board - KERN EW Service Manual

5.6.2 How To Install AJDP Circuit Board

(1) Solder wires of the Tuning-fork sensor to the new AJDP board
(2) Plug connectors.
CN1 : AJLF cord
CN3 : Calibration cord
CN4 : AJIF cord
CN5 : Battery cord
(3) Place the AJDP board on the chassis. Fix it with a fixing screw.
(4) Cover the scale referring to 5-2.
- 38 - EW_EW-C_EG_N-SH-e-0722