Sequence Of Tuning-Fork Sensor Replacement; How To Uninstall Tuning-Fork Assy - KERN EW Service Manual

5.5 Sequence Of Tuning-Fork Sensor Replacement

5.5.1 How to uninstall Tuning-fork assy

(1) Remove the mechanical unit from the chassis.
(2) Replace the tuning-fork sensor.
(3) Insert shim at stopper.
(4) While holding guide link down to under direction, tighten screws.
(Need the torque 25kgfcm)
- 36 - EW_EW-C_EG_N-SH-e-0722