Plate Rib Replacement Procedure - KERN EW Service Manual

5.4.1 Plate Rib Replacement Procedure

(1) Remove the mechanism unit from the chassis. (5-3)
(2) Replace the tuning-fork sensor.
(3) Attach the fixing jig with fixing screws for the tuning-fork sensor assy.
*The fixing jig should be attacked to the guide link.
(4) Remove the damaged plate rib by unscrewing and fix the new one.
(5) Remove the fixing jig.
(6) Fix the tuning-fork sensor assy. (torque 20kgfcm)
- 35 - EW_EW-C_EG_N-SH-e-0722