Troubleshooting; The Appliance Does Not Start - Santos 33 User And Maintenance Manual

SANTOS : Instruction and maintenance manual
Assembling the receiver part (knives) (Fig. H)
1. With a thick cloth, hold the knives
2. Fit the low nut (19) (left-hand thread) into the hexagonal housing of the hard plastic
coupling (12).
3. Adhering to this order, put the knives (15) back on the shaft, the thin, stainless steel
washer (16) then the fiber washer (17) and finally the wide stainless steel washer
(18).
4. Screw up the coupling (12) counter-clockwise (left hand thread).
Fig H

TROUBLESHOOTING

Identifying the cause of appliance stoppage with precision.

The appliance does not start:

• Check: the mains supply, the condition of the supply cord (10).
• Version E: the motor will not start unless the bowl assembly (1) is fitted on the
motor unit (2).
The appliance stops after the motor has overheated:
98133 US 5.0 - 01 2013
:
(BE CAREFUL there is a risk of cutting
15
16
17
(the motor unit is hot)
13 / 19
!
yourself).
18
12
19
www.santos.fr