ELECTRICAL CONNECTION: ....................... 5 USING FOR THE 1st TIME: ......................5 RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE .......... 6 YOUR DRINK MIXER N°54 ......................7 USING THE APPLIANCE ....................... 7 START-UP: ............................7 IDLE POSITION ..........................8 CLEANING: .............................
SANTOS: Instruction and maintenance manual “CE” COMPLIANCE DECLARATION THE MANUFACTURER: SANTOS SAS - 140-150, Av. Roger SALENGRO 69120 VAULX-EN-VELIN (LYON) FRANCE declares that the appliance intended for the professional market described below: Description: DRINK MIXER Type number: 54, 54N, 54L complies with: •...
8. Unplug the appliance before carrying out any work on it: cleaning, maintenance or repair. 9. The use of spare parts other than certified SANTOS original parts is prohibited. 10. Use the appliance if the power cord is damaged. It must be replaced by a special assembly available from an approved SANTOS dealer or from SANTOS itself.
• If the power cable (10) is damaged, it should be replaced by a special assembly available from approved SANTOS dealers or from SANTOS. USING FOR THE 1st TIME: Carefully clean the parts in contact with the food (Fig. A, Fig. B and Fig. C).
For more information, please contact your Retailer or the SANTOS. For eliminating or recycling components of equipment, please contact a specialized company or contact SANTOS.
• The drink mixer N° 54 is designed especially for bars, cafés, hotels, restaurants, cocktail bars, canteens, stores selling fruit juices, cake stores, ice cream parlors.… • The drink mixer N° 54 is designed to mix and emulsify different foodstuffs in liquid and smooth form.
SANTOS: Instruction and maintenance manual IDLE POSITION Placing the cup (1) or (2) in the second position (lower position) on the cup stand (8) puts it into the idle or stop position (Fig. E) NOTE: Emulsions or mixes are usually obtained in under 1 minute.
(6). Screw on the mixing head (3) or (4) by hand. Spare Parts: IMPORTANT: Use of spare parts other than certified original SANTOS parts is prohibited Please quote the following when ordering spare parts (see references in the exploded view at the end of this manual): •...
SANTOS: Instruction and maintenance manual FAULT FINDING Identifying the cause of appliance stoppage precisely. The appliance does not start Check: • the mains supply, the condition of the supply cord (9). • the cup (1) or (2) is fitted properly on the cup stand (8). Check in particular that the top part of the cup is not damaged.
SANTOS: Instruction and maintenance manual NOTE: If one of these problems persists, disconnect the electric power supply (unplug the power supply cord (9)) and call on someone from the maintenance department or contact an approved SANTOS dealer. TECHNICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS (1)
SANTOS: Instruction and maintenance manual Wiring diagram 110-120V~ 50/60Hz POTENTIOMETER TACHYMETRIC Yellow or white ELEMENT Black Black Black Black Brown Blue ELECTRONIC BOARD Black Yellow or white Black Yellow or white AMPEREMETRIC THERMAL PRESENCE PROTECTOR SWITCH Brown Brown Blue Blue Green/yellow 98154 US 3.0 - 01 2015...
SANTOS: Instruction and maintenance manual Wiring diagram 220-240V~ 50/60Hz POTENTIOMETER TACHYMETRIC Yellow or white ELEMENT Jaune Black Black White Black White ELECTRONIC PARASITE BOARD SUPPRESSOR FILTER Brown Black Yellow or white Blue Black Brown Yellow or white AMPEREMETRIC THERMAL PRESENCE...
SANTOS: Instruction and maintenance manual FIGURES - SLOWER + FASTER FIG A SCREW UNSCREW FIG B 98154 US 3.0 - 01 2015 14 / 18 www.santos.fr...
Page 15
SANTOS: Instruction and maintenance manual FIG C FIG D 98154 US 3.0 - 01 2015 15 / 18 www.santos.fr...
Page 16
SANTOS: Instruction and maintenance manual FIG E 98154 US 3.0 - 01 2015 16 / 18 www.santos.fr...
Page 17
SANTOS: Instruction and maintenance manual FIG F ITEM Description Stainless steel cup Plastic cup Mixing head Flexible mixing head Deflector Motor shaft Adjustment knob Cup stand Power supply cord Cup detection finger Base column Motor unit Rubber foot Suction foot Overload protector 98154 US 3.0 - 01 2015...
In case of revelation of an imperfection during the warranty period, the Distributor has to, unless a different written agreement of SANTOS, indicate to his customer to stop any use of the defective product. Such a use would release SANTOS of any responsibility.
Need help?
Do you have a question about the 54 and is the answer not in the manual?
Questions and answers