5.4
Adding functions
5.4.3
Specifying header printing
1
2
3
4
5
6
bizhub 215
Downloaded From ManualsPrinter.com Manuals
Press the Utility key.
Use +, to select [ADMIN. MANAGEMENT], and press the OK key.
Enter the administrator number using the Keypad, and press the OK key.
% The factory default of the administrator number is "000000".
% To correct a numeric value, press the Clear/Stop key.
Use +, to select [E-MAIL SETTING 2], and press the OK key.
Use +, to select [HEADER PRINT], and press the OK key.
Use +, to select [OFF] or [ON], and press the OK key.
This returns to the E-mail Setting 2 screen.
5
5-9