Konica Minolta bizhub 215 User Manual page 102

7.1 Utility settings
In addition to No.1 to No.5, the following items can be configured if FAX Kit FK-510 is installed on this ma-
chine. Press the Utility key, and configure the following settings as necessary.
Settings
[MACHINE
SETTING]
[ADMIN.
MANAGEMENT]
bizhub 215
Downloaded From ManualsPrinter.com Manuals
[BUZZER [DISABLE/
VOLUME] ENABLE]
[CONFIRMATION]
[COMPLETE]
[PREPARATION]
[CAUTION]
[INITIAL MODE]
[REMOTE MONITOR]
[E-MAIL [E-MAIL MODE]
SETTING 1]
[E-MAIL [AUTO
SETTING 2] RECEPTION]
[REPLY ADDRESS]
[HEADER PRINT]
Contents Reference
page
−
Specify whether to
sound the machine
status notification
buzzer.
−
Specify the volume of
the operation confir-
mation sound such
as the input confir-
mation sound, invalid
input sound, or basic
sound.
−
Specify the volume of
the successful com-
pletion sound such
as the print operation
completion sound or
fax communication
completion sound.
−
Specify the volume of
the completed prep-
aration sound.
−
Specify the volume of
the caution sound
such as the simple
caution sound levels
1 to 3, or a severe
caution sound.
−
Select the initial
mode. Select [COPY]
or [FAX].
−
Configure the set-
tings to remotely ac-
cess this machine.
Specify the maximum Each set-
transmission size, ting can be
maximum transmis- configured
sion resolution, and when
compression coding transmit-
method when trans- ting an In-
mitting an Internet ternet fax.
fax. (p. 5-5)
Select [ADVANCED]
in the [E-MAIL
MODE] screen, and
configure each set-
ting.
Configure the setting p. 5-11
to automatically re-
ceive an Internet fax.
Specify an address to p. 5-8
send a receiving re-
sult report to when a
receiving error oc-
curs.
Configure the setting p. 5-9
to send a fax with a
header.
7
7-3