Report Setting; Report Setting Items; Selecting Whether To Automatically Print Out A Activity Report; Selecting Whether To Automatically Print Out A Reservation Report - Konica Minolta bizhub 215 User Manual

7.6

Report setting

7.6 Report setting
Configure settings to automatically print out various reports for fax communication.
7.6.1

Report setting items

No.
1
2
3
4
d
Report settings can also be configured using LSU (Local Setup Utility). For details, refer to page 11-3.
If an optional Image Controller IC-209 or Network Card NC-504 is installed on this machine, settings can
also be configured using PageScope Web Connection. For details, refer to PageScope Web Connection
- [Address] - [Fax Configuration] of [User's Guide Network Administrator].
7.6.2

Selecting whether to automatically print out a Activity Report

1
2
3
4
7.6.3

Selecting whether to automatically print out a reservation report

1
2
3
4
bizhub 215
Downloaded From ManualsPrinter.com Manuals
Report setting
[ACTIVITY REPORT]
[RESERVATION
REPORT]
[TX RESULT REPORT]
[RX RESULT REPORT]
Reference
Press the Utility key.
Use +, to select [REPORTING], and press the OK key.
Use +, to select [ACTIVITY REPORT], and press the OK key.
Use +, to select [OFF] or [ON], and press the OK key.
This returns to the report settings screen.
Press the Utility key.
Use +, to select [REPORTING], and press the OK key.
Use +, to select [RESERVATION REPORT], and press the OK key.
Use +, to select [OFF] or [ON], and press the OK key.
This returns to the report settings screen.
Contents
Prints out the sending and receiving result as a report every 60 com-
munications. Select whether to print out a report automatically when
60 communications are reached.
• The factory default is [ON].
Prints out the reserved information as a report when you establish
communications with multiple destinations by sequential broadcast
transmission or polling RX. Select whether to automatically print out
a report.
• The factory default is [OFF].
Prints out the transmission result as a report after a transmission has
been completed. Select whether to automatically print out a report.
• The factory default is [OFF].
Select whether to print out a report automatically after a confidential
reception has been completed. (If a normal reception has not been
completed properly, a report is output regardless of this setting. )
• The factory default is [OFF].
7
7-27