Table of Contents
Advertisement
Optional accessories
Preparing documents
for scanning
A-61167 April 2005
• Kodak i200 Series Imprinter—prints a date, time, fixed string, and/or
sequential number on document backs. For information about this
accessory, refer to Appendix C, Kodak i200 Series Imprinter.
• Kodak i200 Series Dockable Flatbed—the A3 flatbed adds scanning
capability for exception documents. For information about this accessory,
refer to Appendix D, Kodak i200 Series Dockable Flatbed.
NOTE: For information about ordering the above accessories, refer to
Appendix B, Supplies and Accessories.
• Additional memory (SODIMM)—purchase a memory card at a computer
supply retailer near you. For information about installing a memory card,
refer to Appendix E, Installing Optional Memory.
• A batch of documents to be fed into the scanner must be arranged so that
the leading edges of all documents are aligned and centered under the
automatic document feeder. This allows the feeder to introduce documents
into the scanner one at a time. Documents must be positioned face down
for scanning.
• Staples and paper clips in documents may damage the scanner. Remove all
staples and paper clips before scanning.
• Torn, damaged, or crushed pages can be transported successfully through
the scanner. However, no scanner can transport every possible type of
damaged paper. If in doubt about whether a specific damaged document
can be transported through the scanner, place the document in a clear
protective sleeve. Sleeves should be manually fed, one at a time, folded
edge first, while lifting the gap release lever.
NOTES: You also can use the optional Kodak i200 Series Dockable Flatbed to
scan damaged documents.
In addition, the automatic document feeder on the i280 Scanner
can scan irregularly shaped documents (e.g., pages with coupons
removed or documents with large holes or cutouts in them) when
you use Special Document mode. For more information, refer to the
section "Additional Features."
• When scanning documents in a clear protective sleeve, the input tray guides
must be adjusted to accommodate the width of the sleeve.
NOTE: Kodak scanners have been tested with a range of documents that
represent the broad spectrum of document types found in the most
common business applications. Optimal scanner performance is
achieved when scanning documents within the recommended
document specifications. Scanning documents that are outside of
these specifications may lead to undesirable results in terms of
scanner reliability, image quality, and/or consumable life.
3
Advertisement
Table of Contents
