Table of Contents
Advertisement
UCD300/UMP400
SPECIFICATIONS
CD-R and CD-RW Capability
Depending on media type and method of
"recording/burning", some CD-RIRWs may be
incompatible with this unit. After "recording/
burning", the session must be closed. Please
refer to your software's recommended
procedures for closing a disc/session. Review
your recording software to familiarize yourself
with the correct "recording/burning" procedures.
We
recommend using the latest versions of
ROXIO™
or
NEROTM burning software.
UCD300
This unit will only recognize the CODA
(Compact Disc Digital Audio) format
"recorded/burned" onto a CD-R/RW This unit
does not support .MP3, .WMA, .wAV, .OGG or
other formats. The CODA format is the standard
format of an "original store-bought" CD. VVhen
recording/burning a CO-R/RW make sure the
CDDA format is selected.
UMP400
This unit will only recognize the CODA
(Compact Disc Digital Audio), .MP3 and
.WMA formats "recorded / burned" onto a CD-
R/RW. This unit does not support .wAV, .OGG
or other formats.
Technical Specifications
CEA Power Ratings
Power Output: 13 watts RMS X 4 channels into
4-ohms @
<
1
%
TH D+N
Signal to Noise Ratio: 70dBA below reference.
(Reference: 1 watt, 4-ohms)
Frequency Response: 20Hz to 20kHz, -3dB
Reference Supply Voltage: 14.4VDC
CD Player
Signal to Noise Ratio: > 7SdBA
Frequency Response: 20Hz to 18kHz, ·3dB
Channel Separation:
>
55dB @ 1 kHz
D/A converter: 1 BitiCh
FMTuner
Tuning Range: 87.SMHz - 107.9MHz
Mono Sensitivity: 18dBf
SOdS Stereo Quieting Sensitivity: 20dBf
stereo Separation @ 1 kHz: >30d B
Frequency Response: 30Hz to 12kHz, -3dS
17
AM Tuner
Tuning Range: 530kHz -1710kHz
Sensitivity @ 20dB Signal to Noise: 30uV
Frequency Response: 30Hz - 2kHz, -3dB
General
Power Supply: 11 to 16VDC, negative ground
Fuses: Battery -15 amp, ATO
20-pin quick-connect harness
Dimensions: 7" X 7" X 2" (178mm x 178mm x
51mm)
Specifications subject to change without
notice.
Advertisement
Table of Contents
