Mini Pci Card - Dell Inspiron 8200 Manual

System Upgrades: Dell Inspiron 8200
2. Use the screw and boss holes at opposite corners of the modem daughter card
to align the card, and press the card into its connector on the system board.
3. Install the M2 x 3-mm screw that secures the card to the system board.
4. Replace the memory module/modem cover.

Mini PCI Card

You must remove the optional Mini PCI wireless modem (if installed) before the
system board can be removed. A wireless modem card must be connected to the
internal antenna of the computer.
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Mini PCI Card Cover
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (6 of 9) [2/28/2004 7:40:50 AM]