Dell Inspiron 8200 Manual page 163

RJ-11/RJ-45 Module: Dell Inspiron 8200
Removing the RJ-11/RJ-45 Module
1. Follow the instructions in
2. Remove the
3. From outside the bottom case, push in and up on the RJ-11/RJ-45 module while
pulling the side of the bottom case slightly outward. When the module
disengages, lift it out.
Replacing the RJ-11/RJ-45 Module
When replacing the RJ-11/RJ-45 module, hold both cables safely out of the way and
snap the housing down into place. Then route the modem cable through the vertical
slot, through the appropriate posts, and out through the corner of the memory
module/modem cutout.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (2 of 3) [2/28/2004 7:41:00 AM]
"Preparing to Work Inside the
system board.
Computer."