Replacing The Display Panel - Dell Inspiron 8200 Manual

Display: Dell Inspiron 8200
1 ZIF connector
2 standard connector

Replacing the Display Panel

HINT: Use a magnetic screwdriver to reassemble the display panel in the
display.
1. Connect the flex cable to the two connectors on the back of the display panel.
2. Place the display panel in the top cover, taking care that the flex cable is in
place and is not crushed or crimped.
3. Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bracket
to the top cover.
4. Starting on the left side, use a magnetic screwdriver to reinstall the six M2 x 3-
mm screws that secure the display panel in the top cover.
5. Reinstall the M2.5 x 6-mm flex-cable strain relief screw that secures the display
flex-cable strain relief, and reconnect the flex cable to the graphics card.
6. Reinstall the display bezel.
Display Latch
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (9 of 10) [2/28/2004 7:40:53 AM]