Dell Inspiron 8200 Manual page 128

Display: Dell Inspiron 8200
1 M2.5 x 6-mm screw
2 strain relief
3 display flex cable
4 pull loop
2. Remove the M2.5 x 6-mm flex-cable strain relief screw, and then use the pull
loop to remove the display flex cable from the graphics card.
NOTICE: When reconnecting the flex cable, press down on both ends of the
connector, not in the middle. Pressing the middle of the connector can damage
fragile components.
3. Open the display and, from the back of the computer, remove the two M2.5 x 6-
mm screws labeled "circle D" that secure the display assembly to the bottom
case.
4. With the display in an upright position, lift the display assembly from the bottom
case.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (5 of 10) [2/28/2004 7:40:53 AM]