How To Use "Delay To Next String" And Invoke Repeat Loop; Set Cc Alt; Show Strings On Power-On - Hall Research Technologies CC-101 User Manual

Closed caption decoder and text video overlay with cc streaming, progressive component (ypbpr) and vga outputs on the "-pro" unit

Table of Contents

Closed Caption & Text on Video Overlay

. . How to use "Delay to Next String" and invoke repeat loop

A "Delay to Next String" wait time can be added to the end of each stored

string. This wait time can be anywhere from 0 to 65,535 seconds (~18

hours). When these stored strings are displayed by the CC-101(-PRO),

they will be displayed in order from 1 to 10. After each individual string

is shown, the CC-101(-PRO) will wait the amount of time specified in the

"Delay to Next String" field for that string. After that wait time is

complete, the CC-101(-PRO) will display the next string.

After string 10 is displayed, if there is a wait time specified in "Delay to

Next String" for string 10, the CC-101(-PRO) will wait that amount of

time then it will loop and begin displaying the stored strings again starting

with string #1. If there is no wait time specified in "Delay to Next

String" for string 10 the CC-101(-PRO) will not loop back to string #1.

Whatever text is currently overlaid on the screen will remain until the CC

Selection button is pressed.

Important note on Delay or Wait Times

The "Delay to Next String" wait times are not exclusive. This

means that during the wait time period, other actions can take

place like changing the input or output.

The "Wait Frames" command is an exclusive wait. During this

time, the CC-101-PRO will be unresponsive to any button press

or Serial communication. Use it sparingly!

It is used to set the current CC Alternate by selecting the desired option

button.

When this checkbox is checked, the CC-101(-PRO) will always display

the stored strings immediately on power-up.

Table of Contents

Cc-101-pro