Maintenance - Permobil MPS B2 Owner's Manual

Maintenance

Owner's Manual MPS B2
Finishes Care and Maintenance
With regular care and maintenance, your Permobil will provide years of superior
performance and satisfaction. To maintain the finish quality of your wheelchair,
please follow the cleaning procedures provided below.
The instructions for the care and maintenance of Permobil products are provided
to you as a service. No warranty is implied since results may vary.
Vinyl Upholstery
For normal cleaning, wash vinyl upholstery with a soft cloth or soft-bristled brush
lathered with mild, nonabrasive soap and lukewarm water. Before the surface
dries, wipe with a clean, dry cloth to remove any residue. This procedure may
be repeated to remove stubborn dirt or stains. Ink spots can sometimes be
removed by washing with soap and water followed by isopropyl alcohol.
Do not use any cleaning method that is not listed above, as other methods may
attack the vinyl and cause eventual degradation.
Coated Metal
For normal cleaning, wash coated metal surfaces with a soft cloth soaked in
detergent and warm water; rinse thoroughly and dry.
Remove scuff marks from low-gloss coatings with pre-softened paste wax,
following the manufacturer's instructions.
Remove scuff marks and scratches from high-gloss coatings using automotive
polishing compounds, either liquid or paste. After polishing, apply a pre-softened
automotive paste wax to restore original sheen.
Plastic
For normal cleaning, wash plastic surfaces with a soft cloth soaked in mild deter-
gent and warm water. Rinse thoroughly and dry with a soft cloth. Do not use
solvents or abrasive kitchen cleaners.
Also see the washing instructions on the various cushions. If necessary, the
covers can be taken off for cleaning.
28