Table of Contents
Advertisement
Owner's Manual MPS B2
Seat tilt (manual adjustment)
The seat angle is adjusted by means
of the screws, Fig.13.
NB: The manual seat angle should
be adjusted only when there is no
load on the seat.
Leg rest and foot plate
Adjustment forward/backward
1. Remove the stop screw (14:1)
and loosen the catch (14:2) on
either side.
2. Adjust as required, fit the stop
screws again and lock the catch.
Height adjustment of foot plate
1. Loosen the screw (14:3) on
either side. The foot plates can
now be adjusted up/down in
1" intervals.
2. Adjust as required and tighten
the screws.
Fig. 13. Manual seat angle
Fig. 14. Adjustment of leg rest and
23
Adjustments
adjustment.
3
foot plate.
1
2
Advertisement
Table of Contents
