Installing The Windows Drivers (Any Version) On The Client System - Kodak PROFESSIONAL ML-500 User Manual
Kodak digital photo print system user's guide ml-500
Hide thumbs
Also See for PROFESSIONAL ML-500:
- Guida dell'utente (158 pages) ,
- Quick setup manual (2 pages) ,
- Operator's manual (48 pages)
Table of Contents
Advertisement
System Requirements and Installation
Installing the WINDOWS Drivers (any version) on
the Client System
From the client system, browse to the print server
system and install the shared printer on the client:
1.
Check that your computer is properly connected
to your network.
2.
From the Start menu select Run.
3.
Type \\"system name" where "system name" is
the name of the system running the ML-500
Printer Utilities. Click OK.
4.
Based on your client operating system,
right-click the appropriate ML-500 printer name
and select Open.
NOTE:
There will be one printer listed for
WINDOWS 98, Me, 2000 and XP Operating
Systems and one printer listed for
WINDOWS NT 4.0 Operating System.
Back
Contents
Next
Index
5.
The ML-500 driver will be installed on the client
system. If the new printer driver is not listed in
the Printers window after the installation is
completed, click the View menu and select
Refresh.
6.
Ensure the Print Server Application is running
on the server, and you are ready to print from
the client system.
13
Advertisement
Table of Contents
